- FERR-L-TITE®
- Application
- Shaft Type
- Clamp Time
- Cure Time
- FERR-L-TITE®
- Points, inserts and outserts.
- Cedar, Aluminum
- N/A
- Approximately 5 min.
- FERR-L-TITE® COOLFLEX™
- Points, inserts, pin bushings and outserts.
- Cedar, Aluminum and Fiberglass
- N/A
- Approximately 5 min.
- INSERT IRON™
- Points, inserts, and outserts.
- Cedar, Aluminum, Carbon and Fiberglass
- N/A
- 48 hours
Ferr-L-Tite®
Ferr-L-Tite was Bohning’s first product, developed in 1946, and has been the archery industry’s standard ever since! This hot melt adhesive is designed for points, inserts, and outserts on wood and aluminum shafts (for carbon, we recommend Ferr-L-Tite Cool Flex). It requires an open flame for installation or removal and is fully cured as soon as it reaches room temperature (about 5 minutes). Ferr-L-Tite is heat reversible on aluminum shafts – flame required. It has a melting point of 350° F (176.7°C).
Available in 12 gram sticks and 1 pound bricks. No expiration.
Proudly manufactured at the Bohning factory in Lake City, Michigan, United States.
Ferr-L-Tite® CoolFlex™
Ferr-L-Tite Cool Flex is designed for points, inserts, outserts, and pin bushings on carbon shafts. This hot melt adhesive has flexible properties which keep it from cracking even after repeated target impacts. Cool Flex is a must for carbon shafts, but it also works great on aluminum and fiberglass. It requires a flame for installation, but just use HOT WATER for easy adjustment, replacement, or removal of points, inserts, outserts, and pin bushings. Cool Flex is fully cured as soon as it reaches room temperature (about 5 minutes), and its melting point is 280°F (137.8°C).
Available in 12 gram sticks and 1 pound bricks. No expiration.
Proudly manufactured at the Bohning factory in Lake City, Michigan, United States.
Insert Iron™
Bohning’s Insert Iron is designed for inserts, points, and outserts. It works on all shaft types – carbon, aluminum, fiberglass, and wood. Insert Iron is our strongest glue and it is NOT reversible.
Cure time is 48 hours (72 hours if air is dry during application).
Do NOT store Insert Iron in the refrigerator. To prevent it from drying out prematurely, ensure cap & tip are tightly sealed. For added protection, place Insert Iron bottle inside plastic bag or container.
One year expiration on unopened bottles.
1oz bottle
- FERR-L-TITE®
- Application
- Shaft Type
- Clamp Time
- Cure Time
- FERR-L-TITE®
- Points, inserts and outserts.
- Cedar, Aluminum
- N/A
- Approximately 5 min.
- FERR-L-TITE® COOLFLEX™
- Points, inserts, pin bushings and outserts.
- Cedar, Aluminum and Fiberglass
- N/A
- Approximately 5 min.
- INSERT IRON™
- Points, inserts, and outserts.
- Cedar, Aluminum, Carbon and Fiberglass
- N/A
- 48 hours